Products - Blown Film - Canliners
| Typical Specifications | ||
| Applications | Trash bags, kitchen bags, composting bags | |
| Widths | 40 to 120 inch | 1 to 3 m |
| Line Speeds | to 400 fpm | 120 mpm |
| Thickness Range | 0.5 mil to 3 mil | 12 to 75 micron |
| Finished roll diameters | to 60 inch | 1.5 m |
| Output | 1000 to 2000 PPH | 500 to 700 kg/hr |
| Configurations | Single, Dual and Quad die systems | |
| Features | Integrator full control system, Gravimetric layer ratio control, MAC extruders, DSB screws, Lo-Pro dies, WesJet Air Ring, ENTRAC cooling device, Surface Winders, In-line bag making, Full Automation | |
Can Liners
Davis-Standard Converting Systems understands that the primary goal in can liner systems is output. Rates over 25 ppi and increased up time are trademarks of the systems we have supplied to the leaders in the industry. The die systems are stationary with oscillating haul-offs so that jumbo rolls can be made for off line converting.
- Super Air Cooled MAC extruders utilize the single high volume suction blower concept for cooling. Low maintenance.
- Pre-wired control panels mounted on extruder bases reduce installation time.
- DSB II screws with high out put mixing.
- Lo-Pro dies allow for easy operator access and excellent uniformity to <5% before auto adjustment.
- WesJet air rings and IBC provide high cooling rates and increased bubble stability.
- ENTRAC units provide increased cooling
- WesJet AutoPro air rings cut the gauge variation in half.
- Collapsing frames can be wood, covered slats or roller with partial or full gussets.
- Surface winders for large roll diameters
