Products - Blown Film - Industrial Bag & Film
| Typical Specifications | ||
| Applications | Industrial Overwraps, Jumbo Bags, Pallet Hoods | |
| Widths | 80 to 200 inches | 2 to 5 m |
| Line Speeds | to 350 fpm | 100 mpm |
| Thickness Range | 0.8 mil to 12 mil | 20 to 300 micron |
| Finished roll diameters | to 60 inch | 1500 mm |
| Output | 2000 to 5000 PPH | 1000 to 2300 kg/hr |
| Coextrusion | Mono, three and five layer systems | |
| Features | Gusseting and folding, MAC extruders, DSB screws, Lo-Pro dies, WesJet AutoPro Air Ring, Surface and Dual Turret Winders, Small and large roll winders, Full Automation | |
Industrial Films & Bags
Davis-Standard Converting Systems leads the industry in experience and technology innovation on large, wide blown film systems. There is no better extruder available for high output and low melt temperature than the MAC extruder and DSBII screw. The unique extrusion concept leads to the best and most consistent melt quality (temperature uniformity to 2 degrees F and pressure variation <1%) which is necessary to get uniformity from large dies. The die systems can be oscillating up to 1.2 M diameter or stationary up to 2.1M diameter. These systems produce controlled property films at wide widths with flat rolls.
- Super Air Cooled MAC extruders utilize the single high volume suction blower concept for cooling. Low maintenance.
- DSB II screws in special diameters of 130 mm, 150mm, 165mm, 200mm and 220mm provide uniform high output of LLD/LD/HD/EVA blends. Best MD variation in industry.
- Lo-Pro dies allow for easy operator access and excellent uniformity to <5% before auto adjustment.
- WesJet air rings and IBC provide high cooling rates and increased bubble stability.
- WesJet AutoPro air rings cut the gauge variation in half.
- Collapsing frames can be wood, covered slats or roller with partial of full gussets.
- Winders can be shafted or shaftless
- Roll carts and shaft handling
