Products - Extrusion Coating & Laminating - Flexible Packaging & Laminating
| Typical Specifications | |
| APPLICATIONS: | LIDDING STOCK, CANDY WRAPPERS, SNACK FOOD BAGS, MEDICAL PACKAGING, CONDIMENT PACKS, SOUP SACHETS, TOOTHPASTE TUBES, CABLE WRAP, LAMINATION FILMS |
| WIDTH: | 500 - 2000 mm (20 - 80 inches) |
| Line SPEEDS: | 100 - 750 MPM (300 - 2500 FPM) |
| TENSION RANGE: | 35 - 350 N/M (0.2 - 2.0 PLI) |
| THICKNESS RANGE: | 12 - 100 gsm (.5 - 4 MILS) |
| fINISHED ROLL DIAMETERS: | Up to 1250 MM (50 inches) |
| EXTRUDER OUTPUTS: | Up to 1000 kg (2200 lbs) single extruder Up to 1850 kg (4000 lbs) in co-extrusion arrangement (three extruders) |
| FEATURES: | wide range of line equipment solutions to suit customer's requirements and budgets, latest controls systems, full lines and systematic upgrade/retrofits |
Flexible Packaging & Laminating
Davis Standard’s Converting Systems Group combines the design highlights of Black Clawson, Egan and ER-WE-PA to offer the converter the best and most innovative technology available. We understand that each customer has different requirements to produce a specific product. It is our job to engineer a system that will satisfy those needs.
Our unwinds and winders are available in shafted or shafless designs to integrate with the converter’s existing material handling processes. Alternatively we can provide the material handling system as part of the line. We offer single direction and double direction turrets with fully automatic splicing and transfer systems.
Our liquid coating sub-group supplies the latest in priming and drying so that the highest levels of adhesion can be achieved. In addition, liquid coating and laminating equipment for adhesive or dry-bond lamination could be added to the extrusion coating and laminating line to further expand its capabilities. We have relationships with the major vendors of corona discharge equipment worldwide, giving us the ability to seamlessly integrate their treaters into our flexible packaging extrusion coating and laminating lines.
Davis Standard’s screw designs are designed to deliver the best melt quality to the feedblock for complex coextrusion applications. We control wrinkles in our laminators by installing bowed, spiraled or herringbone rollers, depending on the material to be run. Accurate, repeatable nip performance is achieved with either a linear acting or pivoting motion rubber roller. These rollers come into contact with the laminating drum by using recipe stored pressures and PLC controlled valves. Lightweight hard-surfaced aluminum or carbon fiber idler rollers are used to convey the webs between machine sections without disturbing process tension levels.
For overall line control, we offer the Integrator and Exact control systems. The choice of system is based on customer requirements.
Tell us what you need and let our experienced staff help you process marketable, cost-effective products.
Designed to produce high-quality packaging materials, this flexible packaging line is efficient and cost-effective.
